Matomo image

FAG QJ236-N2-MPA-C3 | B&D Industrial
Send Print
  1. pin-int


FAG QJ236-N2-MPA-C3 4-Point Angular Contact Ball Bearing With (2) Retaining Slots, 180 mm Dia Bore, 320 mm OD, 1 Row, 52 mm W, 35 deg, 670000 N Load

  • Manufacturers: Schaeffler Group
  • Brand Name: FAG
  • PN: FAGQJ236-N2-MPA-C3
  • MPN: QJ236-N2-MPA-C3
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.

FAG Angular Contact Ball Bearing, 4-Point, Series: QJ2-N2, 180 mm Bore, 320 mm OD, 1 Rows, 52 mm Width, 35 deg Contact Angle, Open Closure, 670000 N Load, Brass Cage, 3600 rpm Maximum, 200 deg C

Cage Material      :      Brass
Closure Type      :      Open
Maximum Speed      :      3600 rpm
Series      :      QJ2-N2
Temperature Rating      :      200 deg C
Type      :      4-Point
Bore Diameter      :      180 mm
Outside Diameter      :      320 mm
Number of Rows      :      1
Width      :      52 mm
Contact Angle      :      35 deg
Load Capacity      :      670000 N
  • Four point contact bearings are particularly suitable where predominantly axial loads must be supported
  • The axial design envelope is not sufficient for double row radial angular contact ball bearings
  • Radial forces must be supported by a separate radial bearing
  • Axial forces occur in both directions and a close axial guidance is required in conjunction with a small bearing width
  • Standard solid brass cage
  • 430000 N dynamic/670000 N static
  • Special design axial internal clearance larger than normal
  • (2) retaining slots in outer ring