Matomo image

Dodge® 136245 | B&D Industrial
Send Print
  1. pin-int

Dodge® 136245

Dodge® 136245 211 Non-Expansion Normal Duty Narrow Slot Take-Up Adapter Ball Bearing, 55 mm Dia Bore, 155.7 mm L x 136.7 mm H, 9755 lb Dynamic/6588 lb Static Load

  • Manufacturers: ABB
  • Brand Name: Dodge®
  • PN: DODNSTU-GT-55M
  • MPN: 136245
  • UPC: 782475989621
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Dodge® proudly presents a totally different ball bearing with a name that says it all Grip-Tight®. With its pull/push adapter system, fully concentric 360 deg inner ring, and completely interchangeable housing design, the new Dodge® Grip-Tight® ball bearing is the easy-on/easy-off solution for damage-free shafting, reduced vibration and greater cost/inventory savings. The Grip-Tight® ball bearing is shaft-ready right out of the box and offered in a variety of housing styles for normal and medium duty operations. It accommodates commercial grade and some undersized shafting to lower costs, and all Grip-Tight® assemblies fit into a standard Dodge® ball bearing housing. Plus, this Dodge® bearing has been specifically engineered to run at higher speeds and operate cooler for longer grease life. In test comparisons, the Dodge® Grip-Tight® bearing even proved it could suppress fretting corrosion and scarring to shafts and journals, thus saving not only time but also labor and maintenance costs.

Dodge® Take-Up Adapter Ball Bearing, Non-Expansion Normal Duty Narrow Slot, Series: 211, 55 mm Bore, 155.7 mm Length, 136.7 mm Height, 9755 lb Dynamic/6588 lb Static Load, For Use With: NS407 Narrow Slot Take-Up Frames, Steel Bearing

Bearing Material      :      Steel
Series      :      211
Suitable For Use With      :      NS407 Narrow Slot Take-Up Frames
Type      :      Non-Expansion Normal Duty Narrow Slot
Bore Diameter      :      55 mm
Length      :      155.7 mm
Height      :      136.7 mm
Load Capacity      :      9755 lb Dynamic/6588 lb Static
  • Non-metallic retainer provides added strength
  • Case-carburized inner ring ensures greater wear resistance and longer life
  • DualGuard® seal with rubberized flingers protects by keeping lubricants in, contaminants out
  • Locknut/inner-ring interface acts as bearing puller to ease disassembly
  • Grade 10 balls
  • Higher speed capability
  • Self-aligning
  • Cooler operation for longer grease life
  • Full contact on shaft for better grip
  • Easy-on/easy-off
  • pdfCatalog https://assets.unilogcorp.com/2/ITEM/DOC/Dodge_065931_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/2/ITEM/DOC/Dodge_136135_Manual.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_6ab7fe67210f2077b68816b9431bda5c7dbb0a4c302765eaf0c289d108b44a68.pdf
  • pdfWarranty Information https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_f72c3f2fd40e44bf27049362066fbbce79f483ddafb5d33790909f1947046c15.pdf