Matomo image

Timken® QAAP11A204SM | B&D Industrial
Send Print
  1. pin-int

Timken® QAAP11A204SM

Timken® QAAP11A204SM Extra Heavy Duty Solid Block Type E Pillow Block Spherical Roller Bearing Unit, 2-1/4 in Dia Bore, 6.5 to 7.88 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 9.63 in OAL x 5-1/4 in OAH

  • Manufacturers: Timken
  • Brand Name: Timken®
  • PN: QM QAAP11A204SM
  • MPN: QAAP11A204SM
  • UPC: 883450188180
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Timken® solid block mounted spherical roller bearings (housed units) feature high-performance, low operating temperature Timken® double row spherical roller bearings, cast steel housings, unique locking and sealing design options to offer protection against contaminants in the harshest environments. Timken® spherical roller bearings are ideal for handling high radial loads.

Timken® Pillow Block Spherical Roller Bearing Unit, Extra Heavy Duty Solid Block Type E, 2-1/4 in Bore, 6.5 to 7.88 in Bolt Center-to-Center Length, 2-1/2 in Base to Bore Centerline, 9.63 in Overall Length, 4 in Overall Width, 5-1/4 in Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 2.63 in Base Width, Double Concentric Collar Locking Device, Triple Lip M Seal, Non-Expansion (Fixed) Expansion, 31400 lb Dynamic/31900 lb Static Load, 2200 rpm Maximum, Cast Steel, Powder Coated

Base Width      :      2.63 in
Bore Type      :      Cylindrical
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      31400 lb Dynamic/31900 lb Static
Locking Device      :      Double Concentric Collar
Material      :      Cast Steel
Maximum Speed      :      2200 rpm
Mounting Type      :      Two-Bolt Base
Overall Width      :      4 in
Seal Type      :      Triple Lip M
Type      :      Extra Heavy Duty Solid Block Type E
Bore Diameter      :      2-1/4 in
Bolt Center-to-Center Length      :      6.5 to 7.88 in
Base to Bore Centerline      :      2-1/2 in
Overall Length      :      9.63 in
Overall Height      :      5-1/4 in
  • Concentric locking collar with two set screws at 60 degrees to provide maximum positive locking power with minimal run out
  • Double collared insert provides double the holding power compared to our standard single collared insert
  • Triple-lip contacting, self-purging nitrile rubber seal is excellent in moist and dirty applications, chemical and corrosion resistant
  • Bearing steel
  • Open end type
  • Double row bearing
  • 22211 bearing insert bore series
  • Simple installation
  • Increased holding power
  • pdfCatalog https://assets.unilogcorp.com/2/ITEM/DOC/Timken_DVP09K040SM_Catalog.pdf