Matomo image

Baldor-Reliance BCWD140 | B&D Industrial
Send Print
  1. pin-int

Baldor-Reliance BCWD140

Baldor-Reliance BCWD140 DC Motor Control, 115/230 VAC/0 to 180 VDC, 10.2 A, 1 hp

  • Manufacturers: ABB
  • Brand Name: Baldor-Reliance
  • PN: BALBCWD140
  • MPN: BCWD140
  • UPC: 781568128534
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

A 115/230 VAC, full-wave regenerative variable speed DC drive in a NEMA-4X/IP-65 washdown and watertight enclosure. Designed to operate 90 and 180 V permanent magnet and shunt wound DC motors in a bidirectional mode. It provides 4-quadrant operation, which allows forward and reverse torque in both speed directions. Motor overload protection will shut down control if the motor is overloaded for a predetermined amount of time. The exclusive auto-inhibit circuit allows safe, smooth starting during rapid cycling of the AC line.

Baldor-Reliance DC Motor Control, 115/230 VAC/0 to 180 VDC, 10.2 A, 1 hp, 1 Phase, 5.9 in Width, 5 in D, 9-1/2 in Height, NEMA 4X, Die Cast Aluminum, Acrylic Coated

Depth      :      5 in
Enclosure Type      :      NEMA 4X
Finish      :      Acrylic Coated
Height      :      9-1/2 in
Material      :      Die Cast Aluminum
Phase      :      1
Width      :      5.9 in
Voltage Rating      :      115/230 VAC/0 to 180 VDC
Amperage Rating      :      10.2 A
Horsepower      :      1 hp
  • It is designed for applications requiring washdown watertight integrity
  • Its housing is ruggedly constructed of die cast aluminum which is protected with an acrylic coating for the ultimate in corrosion resistance
  • All switches are sealed with rubber boots and the main speed potentiometer has a shaft seal
  • Short circuit and transient protection are provided for ultimate in reliability
  • Electronic overload protection prevents motor burnout and demagnetization of PM motors
  • The control can be operated in either the speed or torque mode via jumper selection
  • The current range, which is also jumper selectable, eliminates the necessity for calibration of IR compensation and current limit for most applications
  • AC line voltage 230/115 VAC (jumper selectable), DC armature voltage (180/90 VDC) and feedback type may be armature/tachometer
  • pdfCatalog https://assets.unilogcorp.com/2/ITEM/DOC/Baldor_Reliance_3AUA0000013872_Catalog.pdf